T56 6-Speed Short Throw Shifter W/Baseshift Knob Billet for 93-02 Camaro/Firebird F-Body Ls1 Pdz03

T56 6-Speed Short Throw Shifter w/BaseShift Knob Billet For 93-02 Camaro/Firebird F-Body LS1 PDZ03

Application:

Fit T56 6-Speed  Manual Transmission(Borg Warner/Tremec) Only !!!!!

Not Fit Aftermarket Version Of T56 !!!!!

For 93-02Chevrolet Camaro/Pontiac Firebird.

Vehicle compatibility charts are for REFERENCE ONLY.Check the size to match your needs.

Specification:

100% quality assurance tested, more responsive, less expensive, easier to install.

Easy direct bolt-in installation.

Offset shift lever closer to the driver, for budget minded racers without sacrificing quality or reliability.

Reduceshifter throw by 30~40%fora muchfirm,fast, precise,smooth and controlled gear shifting motion.

Billet steel and nickel plated gear selector for ultra low friction and corrosion resistance.

Durable steel gear stops to prevent damaging transmission.

Accept OEM or aftermarket M16-1.50 thread shift knobs. Our product has a shift knob of the same color as the lever.

Material & Color:

Material: made of high quality Billet Aluminum and Steel.

Color: as picture.

Package Included:

1x Short Shifter Base Plate;

4x Allen Screw For Fixing Base Plate;

1x Short Shifter Lever;

2x Allen Screw For Fixing Lever;

1x Short Shifter Knob. (100% Brand New Never Used Or Installed)

Installation Instructions:

1.Unscrew the knob from the stock shifter. Remove the boot and trim plate from the console. It snaps out. Pull the parking brake all the way on. Remove the screws that secure the console to the floor and instrument panel. It is held on by two screws in the bottom of the glove box, two screws at the front by the instrument panel and two can be lifted up at the rear then pulled back and removed completely. Remove the rubber boot that is attached to the floor pan. Save the screws for re-installing this boot. The rubber of the boot may be stuck tight to the floor pan. If it is, gently pry it away from the floor pan before trying to remove the whole part from the vehicle.

2.Remove the four screw that secure the stock shifter to the top of the transmission. You will have to work the shifter loose, because of the factory RTV sealer. You can put it in neutral and gently put pressure to the passenger side of the console.

3.When removing the shifter make sure the plastic bushing that receives the ball end of the shifter stay in the transmission. If it comes out, grease the bushing and place it back into the transmission.

4.Clean all traces of the original sealer from the shifter mounting surface. Put the new RTV sealer on the top surface of the transmission and install the new short throw shifter. Use the supplied four stainless steel M8X1.25 Allen head screws to secure the shifter to the transmission(Do not use the stock screws.). Install the short throw shifter lever with supplied two stainless screws.

5.Check the operation of the shifter. Take factory transmission tunnel rubber shifter boot and trim a circular pattern until the shifter boot will stretch over the shifter stops on the short shifter. This lower boot must be used to keep dirt and water out of the shifter mechanism.

6.Install the original screws and secure the boot to the floor. Reassemble the console. Install the original screws and tighten. Install the original interior boot and trim plate. Rotate the stock knob back or use a replacement knob with a M16-1.50 thread.

Positive Stop Screws

Adjusting the stop screws. Pull the shifter back into fourth gear. Turn the stop screw in with your fingers until it contacts the lower shifter stick. Turn the stop screw out 1/2 of a turn. Hold the stop screw with an Allen key and tighten the jam nut securely. Push the shifter firmly into third gear and repeat the process with the front stop screw and lock it in place with jam nut.

Note:

Provide Tracking Number With Every Order, Please Buy With Confidence!

No installation guides are included. We highly recommend to seek professional installation. Any damage during installation will not be refunded.

Will come with everything you see in the picture. Please allow difference due to manual measurement.

Please check that the picture matches before purchase. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.

For any inquiries or special requests such as larger amount ordering please write to us.